One of the strongest and most cutting-edge networking devices available is the D-Link EXO AX4860 WiFi 6 router. In order to configure the AX4860 WiFi 6 router, you will need the D-Link mobile app. The D-Link app is a great tool for quickly setting up your D-Link router.
However, there is a different method of configuring the AX4860 WiFi 6 router, and that is by using a web browser. You can easily set up your D-Link wireless router by visiting “dlinkrouter.local“. This is the URL for the web interface for your router, which is where you can make changes to the settings for the wireless connection.
In this article, we will show you how to set up your new DLink wifi router by using the manufacturer-supplied URL and mobile app.
Setup the AX4860 WiFi 6 Router via Dlinkrouter.local.
- Since you have already connected your D-Link router and modem via wires, you can jump right into the web configuration stages.
- Secondly, establish a network connection between your computer and the router, either physically or wirelessly.
- To access the router’s configuration page, open a web browser and enter http://dlinkrouter.local in the address bar.
- Your web browser will take you to the D-Link router’s administration panel.
- On the login screen of your Dlink router, enter the username admin and the password.
- After entering your login information, you will be taken to the dlinkrouter.local configuration page.
- Then, find out what kind of network connection you’re using.
- Now, navigate to the wireless settings and give your wireless network a name (SSID) or pre-shared key (wifi password).
- When you’re finished making changes, select Save and then reboot your router.
Setup the AX4860 WiFi 6 Router via the D-Link App.
- First, take your router out of its box and set it up near your modem.
- Connect the router and modem to an Ethernet connection.
- Turn on the wireless router from D-Link.
- The next step is to get the D-Link app for your mobile device.
- You can get the D-Link app for both iOS and Android.
- Second, launch the app and, if requested, grant the necessary permissions.
- The next step is to access the router’s Installation Card.
- Scan the QR code with the D-Link mobile app, and then set up your AX4860 WiFi 6 router as directed within the app.
