The installation of a Dlink extender in your home will increase the wireless network’s coverage area. A Dlink extender can greatly expand the range of your home’s wireless network. D-Link extenders not only eliminate dead zones, but also boost the coverage area of an existing wireless network.. The Dlink extender can be configured with the help of a web utility accessible at http://dlinkap.local. This is the default web URL for the Dlink extender login page. While setting up a Dlink extender for the first time at your home, you’ll need to go through both the standard and advanced configuration processes. If you’re having trouble getting online at home, the dlink wifi extender setup wizard can assist. If you want to know how to setup Dlink extender, you can do so by reading this blog post.
How to Install the Dlink Extender
Before we get started, keep in mind that each Dlink extender type may have somewhat different setup instructions. For further instructions, it is crucial to consult the user manual for your device.
In general, you can set up your Dlink extender by following these steps:
1. A place for your Dlink extender
As a first step, locate a good spot for your Dlink extender. It should be positioned in a central location between your router and the area to which you wish to expand the signal. Also, the extender needs to be put somewhere flat and away from any other electronics that can interfere with the signal.
2. Turn on the D-Link range extender.
Just turn on your Dlink range extender and plug it in. Do not move on until the device has fully powered up.
3. Join the Dlink extender to the PC.
Connecting the Dlink extender to a personal computer is required for initial setup. To do this, either plug an Ethernet connection into your computer or join the extender’s wireless network.
4. Go into the settings for the Dlink range extender.
Launch a web browser and enter the Dlink range extender’s IP address after your PC is connected to it. This address can be found on a label on the device’s underside or in the instructions.
5. Set up your Dlink range extender.
Once you reach the Dlink extender’s setup page, you may begin setting it up. Connect the Dlink extender to your current wireless network by following the on-screen prompts. A new SSID and password may be require for the larger network.
6. Make sure your Dlink range extender is working properly.
After you’ve finished setting up your Dlink extender, it’s time to make sure it’s working properly. Take your internet speed test where you were experiencing dropped calls or weak signals. If everything is functioning properly, your internet connection should be fast and stable.
