With the D-Link DSC-930L wireless IP camera, you can keep an eye on your house or place of business from a distance. The DSC-930L camera has the following features:
- Wireless Connectivity: The DSC-930L connects wirelessly to your home or office network, making installation and mobility simple.
- High-Quality Video: The camera can record 640×480-pixel videos, and its 1.0 Lux CMOS sensor produces sharp images even in dim lighting.
- Motion Detection: The camera includes built-in motion detection that, when it detects motion, sends you an email alert or stores the video to an SD card.
- Simple Setup: A simple setup wizard that is included with the camera walks you through configuring it and attaching it to your network.
How to change D-Link DSC-930L default FTP port 21
To change the default FTP port 21 on a D-Link DSC-930L camera, you will need to access the camera’s web-based configuration page. Here’s a step-by-step guide on how to change dlink dsc 930l default ftp port 21:
- Make sure the D-Link DSC-930L camera is and connected to your network.
- Launch your computer’s web browser and enter the IP address of the camera in the address box. The DSC-930L’s default IP address is “192.168.0.20”.
- To access the web-based settings page, enter the camera’s login information. “Admin” is the standard username, while “blank” is the standard password.
- After you have logged in, select “FTP” from the “Setup” page.
- You will find a “FTP Port” option under the “FTP Settings” section. This is set to “21” by default.
- Type a new port number in the “FTP Port” column to replace the default FTP port. Any port number between 1024 and 65535 is fine, though it is essential that you choose one greater than 1024.
- To save the changes after entering the new FTP port number, click the “Save” button.
- After saving, restart the camera to activate the new FTP port. Click “Reboot” after selecting the “System” option to accomplish this.
- To access the camera’s FTP server after it has resumed, you must use the new FTP port number.
Finishing! Your D-Link DSC-930L camera’s default FTP port 21 is now set. You can strengthen the security of your camera and stop illegal access to your FTP server by changing the default port number.
FAQs
What is the default IP for D-Link DCS-930l?
To access the router’s web-based user interface, enter 192.168.0.20 (the standard IP to access the admin interface) in your web browser’s address bar. A username and a password can be entered in the two text fields that you should see. Your Dlink DCS-930L’s admin is the default username.
How do I reset my D-Link DCS-930l?
Release the paperclip after five seconds of pushing and holding it in the reset hole. The camera should now be adjusted to its factory defaults. This was valuable to 1068 people. This was valuable to 1068 people.
What is the default IP access point for D-Link?
192.168.0.1 or the following URL are the default IP addresses for D-Link routers. Step 2: A D-Link login screen should appear. There is no need for a password because the default username is admin.
How do I access my D Link camera on my computer?
1. Join the camera to your Wi-Fi network at the moment.
2. Start the quick installation wizard on your computer.
3. Visit mydlink.com to log in and see and hear what’s happening in your house right now. It’s that easy!
How do I setup my D Link DCS 932L?
The Ethernet port on the rear of the DCS-932L is where you connect it to your router using the provided Ethernet cable. Push and hold the WPS button on the camera’s rear for five seconds if utilizing a wireless connection. Blinking will begin on the blue WPS status LED.
How do I update my D-Link DCS 932l firmware?
To update the firmware, follow these instructions:
1. Get the most recent firmware update from the D-Link website. The file is in the. Bin file extension.
2. Log in to the web interface for the camera and select setup/maintenance/firmware upgrade.
3. Click Browse and enter the firmware file’s location.
