In this step-by-step guide, we’ll walk you through the process of installing your NETGEAR router using the router web interface. Whether you’re setting up a new router or replacing an old one, following these instructions will ensure a smooth installation process. Let’s get started!
Why should you use the router’s website?
Using the router’s website makes it easier to set up and gives you more control over your network settings. It’s helpful for making special adjustments to fit your needs.
Things you need before setting up:
- Make sure you have your NETGEAR router ready.
- You’ll need a cable to connect your router to your computer or modem.
- You’ll need a device with a web browser to get to the router’s website.
- Make sure your internet works so you can download any updates needed during setup.
Netgear Router Setup Process
- Connect your router to power and turn it on.
- Use an Ethernet cable to link your modem to the router’s internet port.
- Use another Ethernet cable to connect your computer to any of the router’s LAN ports.
- Open a web browser on your computer or phone.
- Type in the router’s default IP address in the address bar: “http://192.168.1.1” or “http://192.168.0.1” and hit Enter.
- You’ll be asked to type in the router’s username and password. The default ones are usually “admin” for the username and “password” for the password. If you’ve changed them before, use the new ones.
Read More:
1. How to Login Netgear Router
2. How can I get my Netgear router setup and installed
