Blog

Step into the future of better internet with the Dlink DAP 1955. Our guide will help you set it up, fix issues, and make it work even better. Whether you love tech stuff, own a small business, or just need good internet at home, this guide is for you. It will show you how to get the most out of the Dlink DAP 1955 and improve your internet experience. Let’s get started and make your internet connection awesome!

Step-by-Step Setup Dlink DAP 1955 using WPS

1. Find a good spot for your D-link DAP 1955 where it gets a strong Wi-Fi signal from your main router and is close enough to the devices you want to connect.
2. Plug in your Dlink DAP 1955 and turn it on.
3. Look for the WPS button on the D-link DAP 1955 (usually on the front or side) and press and hold it until the WPS light starts blinking.
4. Now, on your main Wi-Fi router, find its WPS button. If it’s a physical button, press it. If it’s through the router’s web interface, log in and start the WPS process.
5. Wait for a minute or two. Both the D-link DAP 1955 and the router’s WPS lights will blink during this time.
6. When the lights on both devices stay steady, it means they’ve connected successfully.
7. If asked, tweak the Dlink DAP 1955 extended Wi-Fi settings. This might involve setting a new name (SSID) and password for the extended network.
8. Your DAP 1955 is all set up. Connect your gadgets to the new extended Wi-Fi using the fresh SSID and password.

Setup Dlink DAP 1955 With Dlinkap.local

1. Find a good spot for your Dlink DAP 1955 where it can grab a strong Wi-Fi signal from your main router and is close to the devices you want to connect.
2. Now, plug in your Dlink DAP 1955 and turn it on. Check for the power light to make sure it’s good to go.
3. Look for the WPS button on your Dlink DAP 1955 (usually on the front or side). Hold it down until you see the WPS light blinking.
4. Next, go to your main Wi-Fi router. Find its WPS button and give it a press. If it’s through the router’s web interface, log in and start the WPS process.
5. Wait patiently for a minute or two. Both the DAP 1955 and the router’s WPS lights will be doing a little dance during this time.
6. Once both lights stay steady. They’re connected.
7. If asked, make any tweaks to the extended Wi-Fi settings on the Dlink DAP 1955. This might mean setting a new SSID and password for the extended network.
8. And there you have it! Your DAP 1955 is all set up. Connect your gadgets to the fresh extended Wi-Fi using the new SSID and password.

Troubleshooting: How to RESET Dlink DAP 1955

Facing issues? Consider a reset:

1. Find the Reset Button: Identify the strategic placement of the reset button on the device.
2. Press and Hold: Firmly press and hold the reset button for 10 seconds.
3. Reconfigure After Reset: Following the reset, adjust the settings of your Dlink DAP 1955 as required.

Staying Updated: Firmware Update Simplified

Ensuring optimal performance through regular firmware updates:

1. Check Current Firmware Version: Access the web interface to identify your current firmware.
2. Downloading the Latest Firmware: Visit Dlink’s official website to secure the most recent firmware.
3. Update and Enhance: Follow on-screen instructions to elevate your Dlink DAP 1955’s features.

Dlink DAP 1955 as an Access Point

Optimize your device’s capabilities by setting it up as an access point:

1. Log in to Web Interface: Access the web interface using the provided IP address.
2. Go to Settings: Find the access point settings in the user-friendly interface.
3. Apply Changes: Confirm and implement changes to convert your DAP 1955 into an access point.

Read More: How To Recover Your D-link Wireless Router Password: A Step-by-Step Guide

FAQ (Frequently asked questions)