Blog

D-Link DWR‑960 LTE Cat7 Wi-Fi AC1200 Router: A Complete Setup Guide

In this comprehensive guide, we will walk you through the step-by-step setup process for the D-Link DWR 960 LTE Cat7 Wi-Fi AC1200 Router using the Dlinkapp and Dlinkrouter.local. Additionally, we will cover how to reset the router, update the firmware, and configure it as an access point. Whether you are a novice or an experienced user, this article will provide you with all the information you need to get the most out of your Dlink AC1200 router.

Introduction

The D-Link DWR 960 LTE Cat7 Wi-Fi AC1200 Router is a cutting-edge device that offers fast and efficient 4G LTE Cat7 mobile connection with throughput speeds of up to 300 Mbps. With its Wireless AC technology and a host of advanced features, this router is designed to deliver seamless connectivity and high-speed internet access.

Setting Up Your D-Link DWR‑960 Router

To begin the setup process, you will need to connect your Dlink AC1200 router to a power source and turn it on. Once the router is powered up, you can proceed with the following steps to complete the setup using the Dlinkapp and Dlinkrouter.local.

1. Connecting to the Dlinkapp
   • Download and install the Dlinkapp on your mobile device from the App Store or Google Play Store.
   • Open the Dlinkapp and follow the on-screen instructions to create a new account or log in to your existing D-Link account.
   • Once you are logged in, the app will automatically detect your D-Link DWR 960 router. Follow the in-app prompts to complete the setup process.
2. Accessing Dlinkrouter.local
   • Open a web browser on your computer or mobile device and enter “http://dlinkrouter.local” in the address bar.
   • You will be prompted to enter the default username and password for your D-Link DWR 960 router. The usual username and password that are set by default are both typically “admin.”
   • After logging in, you will have access to the router’s web-based setup page, where you can configure various settings and customize the network according to your preferences.

Read More: Setup Dlink DIR 1750 AC1750 MU-MIMO Wi-Fi Gigabit Router

D-Link DWR 960 LTE Cat7 Wi-Fi AC1200 Router Login

To log in to your D-Link DWR 960 router, you can use the following steps:

1. Use a web browser on your computer or phone.
2. Type “http://dlinkrouter.local” in the address bar, and then hit Enter.
3. You’ll need to type in your username and password when asked. Use the default credentials (usually “admin” for both username and password) to log in to the router’s web-based interface.

How to Reset Your D-Link DWR 960 Router

If you ever need to reset your D-Link DWR 960 router to its factory default settings, you can do so by following these steps:

1. Find the Reset button on the back of the router.
2. Using a paperclip or a similar tool, press and hold the Reset button for about 10 seconds.
3. Release the Reset button when the Power LED starts blinking, indicating that the reset process is complete.
4. Your router will reboot automatically, and the settings will be restored to their factory defaults.

Configuring D-Link DWR 960 Router as an Access Point

If you want to use your D-Link DWR 960 router as an access point to extend your existing network, you can do so by following these steps:

1. Connect your computer to the D-Link DWR 960 router using an Ethernet cable.
2. Use a web browser and type “http://dlinkrouter.local” into the address bar.
3. Log in to the router’s web-based interface using your username and password.
4. Navigate to the access point settings and configure the router to operate in access point mode.
5. Follow the on-screen instructions to complete the setup, and your D-Link DWR 960 router will now function as an access point.

FAQ (Frequently Asked Questions)